Masahiro Takase, Maiko Ito, Hiroshi Takano and Takashiro Akitsu
Masahiro Takase, Maiko Ito, Hiroshi Takano and Takashiro Akitsu*
Department of Chemistry, Faculty of Science, Tokyo University of Science, 1-3 Kagurazaka, Shinjuku-ku, Tokyo 162-8601, Japan
Received May 12, 2016; Accepted May 26, 2016; Published May 28, 2016
Citation: Takase M, Ito M, Takano H, et al. Crystal Structure of a Chiral Schiff Base Zinc (II) Complex, [Zn (C15H12Br2NO2)2]. Struct Chem Crystallogr Commun. 2016, 2:1.
The crystal of the title compound, [Zn (C15H12Br2NO2)2], bis [2, 4- dibromo- 6- [[(1- phenylethyl) imino- κN] 2-hydroxymethyl] phenolato- κO] -zinc (II) is reported. A coordination compound was synthesized from (R)-(−)-2-phenylglycinol, 3, 5-dibromosalicylaldehyde, and zinc (II) acetate dihydrate. Central Zn (II) ion on a symmetry center affords a four-coordinated tetrahedral coordination geometry, Zn-N and Zn-O bond distances being 2.034(5) and 1.940(4) Å, respectively. Benzene rings of ligands formed intramolecular π−π stacking not indicating flexible feature of the rings of (R)-(−)-2-phenylglycinol moiety.
Chirality; Schiff base; Zinc (II) complex; Molecular structure
We have studied on organic/inorganic hybrid materials of chiral Schiff base metal complexes and photochromic dyes such as azobenzene in polymer films to investigate molecular orientation control by irradiation of polarized UV light [1-3]. In this kind of materials, not only molecular structures of metal complexes but also intra- or inter-molecular interaction are important. Since crystal structure of the title compound (Scheme 1), which may be expected π-π stacking and hydrogen bonds, has not been determined yet [4], we report it herein.
Synthesis
Synthesis of the title compound was published in our previous paper [4]. Yellow prismatic crystals of (I) were obtained from reaction solution by solvent diffusion method with water in sample tube at 278 K over 7 days.
Data collection
X-ray diffraction intensity data were collected on Bruker Kappa Apex II single crystal X-ray diffractometer equipped with graphite monochromated MoKα (λ=0.71073 Å) radiation and CCD detector. Crystal of suitable size was mounted on a glass fiber after determination of the unit cell parameters, the intensity data were collected with an average fourfold redundancy per reflection and optimum resolution. The intensity data collection, frames integration, Lorentz and polarization correction and decay correction were done using SAINT software [5]. Empirical absorption correction (multi-scan) was performed using SADABS program [5].
Structure solving and refinement
Crystal structure was solved by direct methods using SHELXS-97 [6]. All the non-hydrogen atoms were located automatically. The structure was then refined by full-matrix least-squares method using SHELXL- 97 [6]. The model of non-hydrogen atoms was refined using by anisotropic thermal parameters. Hydrogen atoms were positioned geometrically C–H=0.93–0.98 Å and allowed to ride on their parent atoms, with Uiso(H)=1.5 Ueq(C) for methyl H 1.2 Ueq(C) for other H atoms mainly. The relevant crystallographic data are listed in Table 1.
Parameters | Values |
Empirical formula | C30H24Br4N2O4Zn |
Formula weight | 861.50 |
Temperature | 100(2) K |
Wavelength | 0.71073Å |
Crystal system, space group | monoclinic, C2 |
Unit cell dimensions | a=10.782(4) Å |
b=10.380(2) Å, β=106.664(4)° | |
c=13.169(3) Å | |
Volume | 1434.8(7)Å3 |
Z, Calculated density | 2, 1.994 Mg/m3 |
Absorption coefficient | 6.466 mm-1 |
F (000) | 840 |
Crystal size | 0.151 × 0.128 × 0.108 mm3 |
Theta range for data collection | 2.21 to 27.35° |
Limiting indices | -13← h←7, -11←k←13, -17←l←15 |
Reflections collected/unique | 3749/22369 [R(int)=0.0578] |
Completeness to theta=27.35 | 86.7% |
Refinement method | Full-matrix least-squares on F2 |
Data/restraints/parameters | 3285 / 1 / 187 |
Goodness-of-fit on F^2 | 0.780 |
Final R indices [I>2&sigm(I)] | R1=0.0345, wR2=0.0955 |
R indices (all data) | R1=0.0354, wR2=0.0963 |
Largest diff. peak and hole | 1.559 and -0.975 e. Å-3 |
Flack Parameter | 0.061(11) |
Table 1: Crystal data for the title compound.
The molecular structure (ORTEP diagram) of the title compound is shown in Figure 1. Selected bond lengths and angles are listed in Table 2. The title zinc(II) complex affords a four-coordinated tetrahedral coordination geometry and umbrella conformation affected in which both ligands bend towards the same side, with Zn1-N1 and Zn1-O1 bond distances being 2.034(5) and 1.940(4) Å, respectively. Because of symmetric center, coordination bond angles are O1-Zn1-N1=94.00(19)°, O1-Zn1-N1’=109.07(19)°, O1- Zn1-O1’=131.1(3)°, and N1-Zn1-N1’=122.8(3)° (‘denotes symmetry code: 1-x, y, 1-z). The values are within common range of the related complexes [7-11]. Benzene rings of ligands, parts of (R)- (−)-2-phenylglycinol and 3, 5-dibromosalicylaldehyde, formed weak intramolecular π-π stacking structure, affecting its umbrella conformation. Contrary to our expectation, there are no relevant hydrogen bonds within 3.3 Å.
Zn1-N1 | 2.034(5) | O1-Zn1-N1+ | 94.00(19) |
Zn1-O1 | 1.940(4) | O1-Zn1-N1’ | 109.07(19) |
N1-C7 | 1.287(8) | O1-Zn1-O1’ | 131.1(3) |
O1-C6 | 1.308(8) | N1-Zn1-N1’ | 122.8(3) |
C6-C5 | 1.421(9) | N1-C7-C5 | 127.4(6) |
Br1-C3 | 1.915(6) | C7-N1-Zn1 | 119.8(4) |
Br2 C1 | 1.903(6) | C6-O1-Zn1 | 122.5(4) |
Table 2: Selected bond lengths (Å) and angles (Å) (‘denotes symmetry code: 1-x, y, 1-z).
Crystallographic data for the structures reported here have been deposited with CCDC Deposition No CCDC 1482903. These data can be obtained free of charge from the Cambridge Crystallographic Data Centre, 12 Union Road, Cambridge CB2 1EZ, UK, Fax: +441223336033; E-mail: deposit@ccdc.cam.ac.uk.